Mesh belt dryer traditional Chinese medicine
Automatic multi-layer mesh belt dryer, automatic wind circulation system (over 30% of energy compared to the same heat source), automatic moisture removal system (to prevent the wet material with dry air), automatic temperature control system (double temperature control)
A medicinal material drying equipment used mesh belt dryer, multi-layer mesh belt dryer, bladder and the mesh is made of stainless steel material.
Two, internal thermal cycling wind design concept, compared with the straight line to save more than 35% of the heat source.
Three, internal thermal cycling wind design, internal temperature can guarantee the dryer, air volume and air pressure to, material drying degree evenly
Four, automatic moisture removal system, prevent the wet air and dry material combination, affect the drying effect and drying time
Five, is a new, energy saving, environmental protection and efficient dryer. Has a large production, dehydration performance is strong, production process in strict accordance with the requirements, a high degree of automation, long service life.
Six, equipment of the company after 10 years of drying technology, drying to obtain all kinds of products test, ShuZhi products drying time, temperature, air velocity, air pressure ratio. To ensure that products do not change color, nutrition, taste good. This equipment is economical and practical, cost-effective, quick return of investment
Seven, the heat source selection have diversity, but the electric heating, heat conduction oil heating, hot air heating, etc
Technical parameters:
model
|
DW-1.2-8
|
DW-1.2-10
|
DW-1.6-8
|
DW1.6-10
|
DW-2-8
|
DW-2-10
|
Unit number
|
4
|
5
|
4
|
5
|
4
|
5
|
bandwidth m
|
1.2
|
1.2
|
1.6
|
1.6
|
2
|
2
|
Dry long
|
8
|
10
|
8
|
10
|
8
|
10
|
Material thickness mm
|
10-80
|
The use of temperature ℃
|
60-130
|
Steam pressure Mpa
|
0.2-0.8
|
The steam consumption of kg/h
|
120-130
|
150-375
|
150-375
|
170-470
|
180-500
|
225-600
|
The drying time h
|
0.2-1.2
|
0.25-1.5
|
0.2-1.2
|
0.25-1.5
|
0.2-1.2
|
0.2-1.5
|
Dry strength kgH2O/h
|
60-160
|
80-220
|
75-220
|
95-250
|
100-260
|
120-300
|
Note: as shown in table dry strength according to the drying temperature, material thickness and the residence time of material. |