Infrared mould furnace profile: the main technical
characteristics
Infrared heating furnace of mould heat source is to use iron flipping aluminum wire, features: high efficiency and energy saving. Infrared heating furnace of mould behind the electrothermal wire plate equipped with infrared radiation, infrared mould heating furnace can effectively reflect the heat to the chamber of a stove or furnace, radiation board, electric wire of a set of infrared heating body, is to heat radiation in the form of electromagnetic energy into the furnace, mold absorption and a heating mode of electromagnetic energy is converted to heat. Mould box to delete is high temperature resistant stainless steel grid structure design, with good mechanical strength, but also has good ventilation and light effect.
Infrared mould furnace three highlights:
Protect mold: uniform optimum heating speed, to avoid the cracking problem such as oxidation caused by rapid heating of the mould, reduces unnecessary repair mode, greatly improving the service life of the mold.
Energy saving:
(1) reasonable drawer tray design, greatly reduce the heat loss;
(2) the effective use of thermal energy, independent research and development of infrared radiation after plate after absorbing heat radiation directly to the chamber of a stove or furnace for heating mould.
(3) high density polymer glass fiber insulation material measures to effectively reduce the heat loss, so as to achieve energy saving purpose directly.
Operation is safe, fast, comfortable, drawer take put mold, avoid the traditional mold mold heat to the body when they open to risk, and physical discomfort. To achieve the goal of safety operation work efficiency.
Efficient: disposable heating more sets of mould, to avoid the high frequency without changing of the mold in hot mould
Infrared furnace design size
Extrusion machine
|
400T~800T
|
1000T~1250T
|
1650T~1880T
|
2200T以上
|
Infrared mould furnace chamber size
|
800x480x350(mm)
|
900x580x4000(mm)
|
900x780x4000(mm)
|
According to the customer mold size
|
power
|
9KW
|
9KW
|
15KW
|
约20KW
|
Heating up time
|
45minutes
|
60minutes
|
90minutes
|
200minutes
|
Can heat the mould at the same time
|
The diameter of160 为 12sets of
|
The diameter of200 为 12sets of
|
The diameter of260 为 8sets of
|
According to the customer mold size
|
|