|
Veneer dryer (click to enter) |
|
Keyword: |
Roller drum veneer dryer
Veneer dryer is one of the main equipment in the process of veneer and plywood production, veneer drying quality directly affect the quality veneers, plywood products, the design of the roller continuous veneer dryer, mainly using the latest international pressure contact veneer drying technology, the main working principle is: veneer under two steel belt clip after preheat preheat tube make the steel belt and veneer temperature uniformity, and then enter the rapid drying between drying drum, so can make dried veneer smooth, uniform moisture content, drying quality and drying efficiency is greatly improved; And with high temperature and wet veneer direct contact heat transfer roller, high thermal efficiency, small heat loss, greatly reduce heat loss characteristics.
Shandong LinQu Hui Yang machinery equipment factory is one specialized is engaged in wood drying veneer drying and scientific research and development, production of large enterprises. Now developed a new type of roller drum veneer dryer. Equipped with integral, high efficiency and energy saving furnace without boiler auxiliary equipment, such as water, coal, electricity, small size, large heat, bark, wood shavings, leftover material can be, and can quickly achieve the heat drying machine need. A 10 meters long single dry machine whole section two fan, fully automatic moisture removal. The total capacity of 12 kw power consumption is only a quarter of the dryer, and other brands daily output up to 3-7 cubic meters or so, can provide you every year to save electricity, water, coal costs 100000 yuan.
Drying system
Drying principle of the machine adopts the most scientific, the hot blast stove directly with centrifugal fan inside the bellows up and down in a hot air injection machine, hot air through the nozzle of the bellows blow to run up and down in the veneer of both sides, make the veneer heated evenly, so as to have the effect of drying.
The transmission system
Vertical plane veneer by feeding port into the machine, by driving up and down two rows of roller chain, relative operation, depend on the roller from the weight of the veneer, veneer through two roll and lee on the mouth at the same time, to achieve the effect of drying and the wrinkles, so the machine drying veneer smooth, smooth and radiant.
Control system
The CVT machine according to your moisture content of veneer thickness and adjust the feed speed, in order to achieve the ideal drying effect.
Heating system
Can use steam heating, heat conduction oil heating, heating stove type, the user can choose one of them.
Inlet width
1.35-3 meters can choose
Drying veneer
The most thin 0.3 mm, 5.0 mm thick.
The main parameters
Book all kinds dryers can according to customer's requirement.
Daily output of 5 to 50 cubic meters. |