Product name: WMH series of fission disassembling combined drying box
Note: wood drying oven, powerful circulation wind flow, flexible humidity control, ensure that all sorts of lumber quality of a material and the rate of material.
WMH special hot air (steam) series of wood drying equipment, can dry all kinds of tree species, various specifications, various USES of wood, with high efficiency and energy saving, safe and reliable drying cycle short, dry good quality, low drying cost advantages, is widely used in large, medium and small wood processing enterprises, especially suitable for the manufacturer of wood products export business.
WMH series wood drying equipment, in normal operation, the fuel in the combustion chamber full burning, generate heat, fully absorbed by dry medium in heat drying system, produce the temperature of 170 degrees Celsius, the circulation fan, under the action of high temperature air flow through the control system, transmission system, the high temperature hot air to dry indoor for lumber drying process. At the same time the steam generating device on the equipment, can produce a large number of atmospheric steam, according to the requirements of the drying process, timely to steam into the drying chamber, to steam injection, wet processing of wood, damping system is an independent steam system, and equipped with a safety device. Wet saturated steam can be in a short period of time to make the surface humidity and internal humidity of wood consistent, so as to achieve the internal and external at the same time, the purpose of dry wood. For solid, thick hard, thick wood, can adopt continuous heating drying process, solves the lumber in the drying process of internal crack, crack, deformation and other defects, make lumber yield is greatly increased.
WMH series wood drying equipment is equipped with thermal energy recovery system, so as to realize the full use of the drying medium, maximum limit to overcome the thermal heat loss caused by wet air emissions. Heat energy recycling, greatly reduces the cost of drying, shorten the drying cycle.
The main technical parameters: |
model |
Outlet temperature℃ |
The fan power
KW |
Heating device |
Indoor temperature℃ |
After drying wood
Wood moisture content |
Installation dimensionsm
Long * wide * high
|
Chamber sizem
Long * wide * high |
ZBX-8 |
≥170 |
1.5 |
A set of |
≥80 |
10% |
5.5×2×2.5 |
4.5×2×2.5 |
ZBX-10 |
≥170 |
2.2 |
A set of |
≥80 |
10% |
5.4×2.4×2.6 |
4.4×2.4×2.6 |
ZBX-15 |
≥170 |
2.2 |
A set of |
≥80 |
10% |
7.2×2.4×2.7 |
6×2.4×2.7 |
ZBX-20 |
≥170 |
3.0 |
A set of |
≥80 |
10% |
6.5×4.5×2.7 |
5.2 ×4.5×2.7 |
ZBX-25 |
≥170 |
3.0 |
A set of |
≥80 |
10% |
7×4.5×2.8 |
5.3×4.5×2.8 |
ZBX-30 |
≥170 |
4.0 |
A set of |
≥80 |
10% |
8×4.5×2.9 |
6×4.5×2.9
|
|
Drying box above data are for reference only, can design according to user requirements. |
|