Metal structure, high strength, good appearance.
Can tear open outfit, mobile convenience.
Suitable for all kinds of soft wood and broadleaf timber drying, insecticidal.
Body size is for reference only, can be separately designed according to user requirements.
According to user requirements design a batch of two boxes or large box.
Due to continuously improve technology, parameter changes the actual shall prevail.
Series of wood drying equipment heat source is introduced
Wood drying is special heat source, internal heat exchange tube system adopts high-tech materials, make the device key parts heat exchange tube at high temperature in the melt state, refractory don't fall off, effectively solve the problem of heat, thus greatly extend the service life of the heat exchange tube, make the equipment in thermal efficiency can reach above 76%; At the same time, the device in the steam generator can produce enough steam drying wood, cooperate with our factory drying process, make to achieve the shortest wood drying cycle and the smallest drying defects.
Working principle:
Wood is special hot air drying equipment (steam), can dry all kinds of tree species, various specifications, various USES of wood, with high efficiency and energy saving, safe and reliable, short drying period, good drying quality, dry low cost advantages, is widely used in large, medium and small wood processing enterprises, especially suitable for the manufacturer of wood products export business. HXM series wood drying equipment, in normal operation, the fuel in the combustion chamber full burning, generate heat, fully absorbed by the drying medium in the heat drying system, produce the temperature of 180 degrees Celsius, the circulation fan, under the action of high temperature air flow through the control system, transmission system, the high temperature hot air to dry indoor for lumber drying process. At the same time the steam generating device on the equipment, can produce a large number of atmospheric steam, according to the requirements of the drying process, timely to steam into the drying chamber, to steam injection, wet processing of wood, damping system is an independent steam system, equipped with a safety device. Wet saturated steam can make the surface of the wood in a short time to have consistent temperature and humidity inside, so as to achieve the internal and external lumber drying purpose at the same time, the solid, thick hard, thick wood, can adopt continuous heating drying process, solves the lumber in the drying process of internal crack, crack, deformation and other defects, make high grade lumber yield is greatly increased. Wood drying equipment is equipped with heat recovery system, greatly reduces the cost of drying, shorten the drying cycle. When lumber moisture content is below 15%, after six to eight hours of high temperature dry steam, can be in parasitic wood inside all the moths and eggs is in addition to the dead, the negative effects of solved by moth, improves the economic benefit for the enterprise.
Control device
Equipment into the wind pipe and return air duct are equipped with adjustable valve, can according to the requirements of the wood drying process, at any time to into the air volume and air regulation. In the fan into FengKouChu also equipped with adjustable compensation, can be regulated according to the drying room the size of the air pressure and air volume. On the equipment body is equipped with steam valves to regulate the steam injection, according to the different needs of wood drying, timely adjust the volume of steam injection. At the bottom of the equipment body also has a combustion device, when the fuel due to various reasons is not easy to burn. Can open the fuel valve intensify combustion to achieve required for each stage of drying temperature.
Product main features:
1. Made of rotary heating device has a combustion chamber, thermal conversion chamber, steam generator, combustion device, fan, water mist to take off the sulphur dust catcher, chimney, etc. High efficiency and energy saving, high heat energy conversion.
2. The required fuel combustion with wood shavings, sawdust, wood scraps, coal, etc.
3. Using features unique steam generator, ensure a sufficient supply of steam drying kiln, because there is a lot of steam into the early dry indoor, increase the indoor humidity to prevent deformation, dry wood.
4. Be dried wood drying cycle is short, low cost and uniform drying, effect is good, solve internal crack in the wood drying process, defects such as fracture, tables, crack, deformation, discoloration.
5. Can be designed in accordance with the requirements into a batch of form a complete set of two drying chamber and convenient operation by turns.
6. Can be combined with the existing kiln technical renovation, save equipment investment.
7. The overall equipment easy to operate, safe and reliable.
8. This equipment is suitable for all kinds of wood drying, is the factory, furniture factory and wood drying kiln method and ideal upgrading old drying equipment.