WMH series wood for the main parts adopt imported from hot steam drying furnace, a specially designed fan, axial flow fan. Has the advantages of high temperature resistant, anti-corrosion, moisture-proof, energy saving, equipped with steam generator can produce a lot of atmospheric pressure steam. Each system according to the wood drying process flexible adjustment, solve for the internal crack in the wood in drying process, the defects such as cracks, tables, crack, deformation, discoloration, at the same time can be parasitic in the wood all the moths and eggs is in addition to the dead, the negative effects of solved by moths. Which equipped with heat recovery unit, make full use of the drying medium, greatly reduces the cost of drying. To improve the economic benefit of enterprise.
Shell adopts steel and import caigang watts welded together, the lining of high strength anti-corrosion aluminum plate, adopt new thermal insulation material filling between inside and outside the plate. Indoor by the evaporator, fan, furnace body, scattered wind pipes, moisture removal device and control box, etc. The hot steam to the drying box is separated from the combustion chamber is completely isolated, so be dry material won't appear the phenomenon such as discoloration, deformation.
Product main features:
1. Made of rotary heating device has a combustion chamber, thermal conversion chamber, steam generator, combustion device, fan, water spray, dust remover, chimneys, and other parts. High efficiency and energy saving, high heat energy conversion.
2.. Burning the fuel wood shavings, sawdust, wood scraps, coal, etc.
3. Using features unique steam generator, ensure a sufficient supply of steam drying kiln, because there is a lot of steam into the early dry indoor, increase the indoor humidity to prevent deformation, dry wood.
4. Be dried wood drying cycle is short, low cost and uniform drying, effect is good, solve internal crack in the wood drying process, defects such as fracture, tables, crack, deformation, discoloration.
5. Can be designed in accordance with the requirements into a batch of form a complete set of two drying chamber and convenient operation by turns.
6. Can be combined with the existing kiln technical renovation, save equipment investment.
7. The overall equipment easy to operate, safe and reliable.
8. This equipment is suitable for all kinds of wood drying, is the factory, furniture factory and wood drying kiln method and ideal upgrading old drying equipment.
The main technical parameters: |
|
model |
Outlet temperature℃ |
The fan power
KW |
Heating device |
Indoor temperature℃ |
Lumber moisture content after drying |
Installation dimensions m
Long * wide * high
|
Chamber sizem
Long * wide * high |
WYH-8 |
≥170 |
1.5 |
A set of |
≥80 |
10% |
5.5×2×2.5 |
4.5×2×2.5 |
WYH—10 |
≥170 |
2.2 |
A set of |
≥80 |
10% |
5.4×2.4×2.6 |
4.4×2.4×2.6 |
WYH-15 |
≥170 |
2.2 |
A set of |
≥80 |
10% |
7.2×2.4×2.7 |
6×2.4×2.7 |
WYH-20 |
≥170 |
3.0 |
A set of |
≥80 |
10% |
6.5×4.5×2.7 |
5.2 ×4.5×2.7 |
WYH-25 |
≥170 |
3.0 |
A set of |
≥80 |
10% |
7×4.5×2.8 |
5.3×4.5×2.8 |
WYH-30 |
≥170 |
4.0 |
A set of |
≥80 |
10% |
8×4.5×2.9 |
6×4.5×2.9 |
|
Drying box above data are for reference only, can design according to user requirements. |
|