High frequency vacuum wood drying
Vacuum kiln kiln body is cylindrical metal structure, compressive strength and good sealing. The dry principle is the use of vacuum degree within the tank, the lower the boiling point of water, speed up the water movement in wood, thereby improve the drying speed, shorten the drying time. So choosing vacuum drying, the drying temperature is low, can reduce or avoid wood drying such as inside crack, shrinkage defects. Vacuum drying method is suitable for dry hard broadleaf wood plate, its permeability good broadleaf timber has good drying effect.
High frequency generator
High frequency high cycle, also known as Europe and the United States called radio frequency (rf), is a kind of high frequency waves, under the effect of this kind of high frequency electric field, the molecules of the dielectric (for example: adhesive molecules, water molecules, PVC, rubber, etc.) by changing electric field polarization repeatedly, the positive and negative vibration molecular constant friction between the two electrodes, generate heat, fast curing, hot glue to make PVC products melt after pressing forming an organic whole, timber fast discharge after evaporation of the water molecules, such as glass fiber reinforced plastic rapid prototyping, so as to achieve quick heating, high efficiency, and selective heating effect. Is widely used for international is a new type of electromagnetic field processing technology.
So high frequency vacuum wood drying equipment is the perfect combination of high frequency heating and vacuum dewatering.
High frequency vacuum wood drying
A rapid increase in temperature, using high frequency heating solved the wood, fast drying speed.
Second, the wood inside and outside the heating at the same time, uniform heating, good quality and can keep the natural wood color.
Three, adopts vacuum suction decreased temperature make wood low temperature evaporation of wood drying process, not easy craze improve the dehydration rate of lumber.
Four, efficient, environmental protection don't pollute the environment.
Five, the high frequency wave that kill the hidden inside the plate insects and bacteria in shorten the drying period and further to ensure the quality of wood drying.
Especially suitable for thick, hard, big section of the wood (conventional drying methods for a long time) rare wood, such as rosewood, chicken wing wood drying, chrysanthemum pear, rosewood, etc. At the same time also use small batch, secondary drying after the urgent get damp wood.
type
|
GZ-3-6-HD
|
Drying kiln inner diameter(mm)
|
¢1800
|
Pile material maximum volume(mm)
|
3000*1000*1000
|
High frequency power output
|
30Kw
|
Working frequency of high frequency
|
6.78MHZ
|
Working temperature
|
40-60 degrees
|
Vacuum degree of work
|
-(0.07-0.09)Mpa
|
High frequency cooling way
|
Forced air cooling
|
Vacuum cooling
|
5 t stainless steel cooling tower
|
The hydraulic system
|
Taiwan TMC field
|
Operation control mode
|
Automatic control in PLC and touch screen
|
The original electric
|
Siemens, omron Eaton
|
The main characteristics of high frequency vacuum wood drying machine:
1) automatic control adopts PLC and touch screen program, various heating parameters set clear and simple, unattended during the wood drying process is completely automatic control.
2) temperature detection using optical fiber, to avoid the high frequency interference in the process of heating. Precise measurement and control way further guarantees the quality of timber drying.
3) dryer is capped with a hydraulic system, adding to pressure on the drying material heap, further to ensure the uniformity of dry wood and prevent the deformation of wood.
4) humidity detection use weighing way, the PLC according to the change of weight of wood, to control the moisture content of lumber. To avoid the traditional metal probe the influence of high frequency electromagnetic, more precise and automatic.
If you have a high frequency of vacuum wood drying equipment of any questions please contact us, will provide you with high frequency vacuum drying equipment.
4.5 cubic high-frequency vacuum drying machine
type
|
GZ-4.5-6-HD
|
Drying kiln inner diameter(mm)
|
¢1800
|
Pile material maximum volume(mm)
|
4500*1000*1000
|
High frequency power output
|
30Kw
|
Working frequency of high frequency
|
6.78MHZ
|
Working temperature
|
40-60degrees
|
Vacuum degree of work
|
-(0.07-0.09)Mpa
|
High frequency cooling way
|
Forced air cooling
|
Vacuum cooling
|
5 t stainless steel cooling tower
|
The hydraulic system
|
Taiwan TMC field
|
Operation control mode
|
Automatic control in PLC and touch screen
|
The original electric
|
Siemens, omron Eaton
|
6 cubic high frequency vacuum drying machine
type
|
GZ-6-6-HD
|
Drying kiln inner diameter(mm)
|
¢1800
|
Pile material maximum volume(mm)
|
6000*1000*1000
|
High frequency power output
|
50Kw
|
Working frequency of high frequency
|
6.78MHZ
|
Working temperature
|
40-60degrees
|
Vacuum degree of work
|
-(0.07-0.09)Mpa
|
High frequency cooling way
|
Forced air cooling
|
Vacuum cooling
|
10 t stainless steel cooling tower
|
The hydraulic system
|
Taiwan TMC field
|
Operation control mode
|
Automatic control in PLC and touch screen
|
The original electric
|
Siemens, omron Eaton
|
10 cubic high frequency vacuum drying machine
type
|
GZ-2-10-HD
|
Drying kiln inner diameter(mm)
|
¢2000
|
Pile material maximum volume(mm)
|
6000*1300*1300
|
High frequency power output
|
70Kw
|
Working frequency of high frequency
|
6.78MHZ
|
Working temperature
|
40-60degrees
|
Vacuum degree of work
|
-(0.07-0.09)Mpa
|
High frequency cooling way
|
Forced air cooling
|
Vacuum cooling
|
10 t stainless steel cooling tower
|
The hydraulic system
|
Taiwan TMC field
|
Operation control mode
|
Automatic control in PLC and touch screen
|
The original electric
|
Siemens, omron Eaton
|
|