Product name: QG series air drier
This type of equipment, to adapt to the material is more, in addition to the basic material mentioned, there are: A.B.C intermediates, A.B.S resin, A.S.C, white carbon black, benzene pyrazole ketones, tea meal, oxalic acid catalyst, promoter M.D.M precipitation, catalyst, carbon powder, benzene sulfonyl ammonia, nitrogen in acetyl of amino acid, compound ear tamar, benzene dicarboxylic acid, ammonium diethylbenzene, titanium dioxide, activated carbon, sodium silicofluoride, fluorspar mining, by-product ammonium sulphate, silica gel powder, synthetic resin, calcium phosphate, polypropylene resin, aureomycin, sodium metasilicate, chaff chlorate coffee grounds, oral glucose chaff, sodium sulfate, sulfide ore, phosphate rock powder, BB, P.V.C, melting phosphate fertilizer, tetracycline, three iron oxide, calcium carbonate, titanium iron ore, copper, potatoes, grain, coal, stearic acid salt, corn protein, pharmaceuticals, reagent, iron oxide slag, wine, etc.
The working principle of
Fan with dispersion effect, especially suitable for drying of heat sensitive materials, high-speed spinning fan impeller, can put the wet, agglomerate material crushing, even until the dispersed, at the same time in the process of dispersed stirring, mixing, and then the material flow and heat flow in parallel. This type of equipment, it is suitable for dry filter cake agglomeration, but also belongs to the material of surface moisture, moisture content of 40% or less, if large quantity or finished product requirements below 15%, can adopt the secondary airflow drying, when the moisture content of materials more than 40%, but 60% or less, the feed is difficult, should use blender, in order to reduce the feed water by using the method of mixed in dry, at this point, the production of drying equipment in it, it is not worthwhile economically.
As a result, the user should use the method of mechanical (centrifugal dehydration or filter) as far as possible to reduce feed moisture, to ensure that the drying operation smoothly.

Click to view animation details

Technical parameters:

Note: * is for secondary drying, installed power, covers an area of steam heating mode is calculated