|
| The tunnel drying equipment (click to enter) |
|
|
| Keyword: |
|
|
|
|
|
|
Product name: tunnel dryer
Tunnel dryer basic dimensions:
Length less than 50 m, width is generally not more than 3.5? M the inclination of the tunnel length direction is 1/200
Bake the commander general is 2 m, width is generally not more than 1.5 m?
20-30 mm baking plate material thickness, the distance between layer and layer above 100 mm, size according to the material.
Drying car speed, according to the final moisture content of the material.
In the cycle of the size of the circulation fan and quantity shall be determined according to the specific measures
The tunnel dryer is introduced:
Will be drying material is put in the car, conveyor belt, shelf or freedom of piled up on the transport equipment. Material along the channel in the drying chamber to move forward, on the other side, for the majority of large water, high yield and low added value of leaf, fiber, block material, tunnel dryer drying equipment is a kind of economical and practical.
Capable of bricks, cement and thermal insulation layer of metal materials.
The longer the drying tunnel, uniform drying, but the greater the resistance.
Tunnel drier hot air: coal-fired hot blast of hot air stove, and burning natural gas, gas, oil, hot air stove, electric heating element and steam, heat conduction oil furnace to produce hot air, also can use flue waste heat.
Can tunnel from the side of the upper or lower, from the other end of the discharge can enter, from both ends and the middle discharge (this way the small resistance of high thermal efficiency) can also be more recycling. To further improve thermal efficiency, achieve the purpose of uniform rapid drying can be downstream and upstream, according to material properties.
Drying car in and out of, can be track, electric drag reducer can also be artificial in and out.
Drying car can be a metal frame structure, the baking plate can be a metal plate mesh or stainless steel plate net, can also use wood, bamboo, screen and so on.
Dc circulating drying tunnel is introduced Russian PY type drying room improvement techniques, when large material moisture, can be set to once-through drying room, when the material when close to, can be set up for circulation drying room, not only good color, drying of material also greatly reduce the production cost for the user.
Drying room is equipped with our factory developed a patented product - s diversion air board (can make the material is heated more evenly), high temperature dust removal filter (to filter out the outside world all dust, ensure the drying out of products meet the export requirements). Our aim is to provide every customer the best seafood drying technical information.
Suitable for: fish, shrimp, shellfish, algae, and the drying operation of farm and sideline products.
Heating method: coal, oil, gas and electric heating.
Drying room size can be designed and manufactured according to user requirements and production. |
|
|
Vegetable mesh belt ...
