The dryer use and composition:
This series of dryer is widely used in cement, mining, building materials, chemical industry, food, such as compound fertilizer production of material drying, in order to control the temperature of the dryer, thermocouple in the front-rear device configuration, through the thermometer can display the dryer front-rear end temperature change, for better control the working temperature of cylinder body (usually 350-380 degrees) to provide the basis.
Dryer is mainly composed of before and after the cylinder gear wheel device, front-rear device, transmission device and the gear cover and other parts. (the accessory equipment of form a complete set with the dryer, the combustion chamber, feed discharging equipment, dust collecting equipment does not belong to the native range).
The dryer works:
The dryer of heat from the combustion device, the dryer adopts downstream type heating mode. Therefore need drying of material, from the feed tank, feeding sneak into the cylinder, and copy is spiral plate to after. Materials because of the dryer tilted, on the one hand, the gravity and rotary low back end, on the other hand the material being repeatedly copied copy board, to the upper constantly raise and down again. Material within the cylinder form curtain evenly, fully with tube in the heat flow into the heat, because the material repeatedly Yang, contains moisture by drying, gradually so as to achieve the purpose of drying.
Click to view animation details
|